manualshive.com logo in svg

Dell PowerVault NX300, Hardware Owner'S Manual, Page: 9 / 192

Share
Download
Dell PowerVault NX300 Hardware Owner'S Manual Download Page 9

About Your System

9

About Your System

Accessing System Features During Startup

The following keystrokes provide access to system features during startup.

Keystroke

Description

<F2>

Enters the System Setup program. See "Using the System Setup 
Program and UEFI Boot Manager" on page 57.

<F10>

Enters System Services, which opens the Unified Server Configurator. 
The Unified Server Configurator allows you to access utilities such as 
embedded system diagnostics. For more information, see the Unified 
Server Configurator documentation.

<F11>

Enters the BIOS Boot Manager or the UEFI Boot Manager, 
depending on the system’s boot configuration. See "Using the System 
Setup Program and UEFI Boot Manager" on page 57.

<F12>

Starts PXE boot.

<Ctrl><E> Enters the Baseboard Management Controller (BMC) or iDRAC 

Configuration Utility, which allows access to the system event log 
(SEL) and configuration of remote access to the system. For more 
information, see the BMC or iDRAC user documentation.

<Ctrl><C> Enters the SAS Configuration Utility. See your SAS adapter 

documentation for more information.

<Ctrl><R> Enters the RAID Configuration Utility. For more information, see the 

documentation for your SAS RAID card.

<Ctrl><S> Enters the utility to configure NIC settings for PXE boot. For more 

information, see the documentation for your integrated NIC.

book.book  Page 9  Thursday, August 13, 2009  7:27 AM

Summary of Contents for PowerVault NX300

































































































































































































Reviews:

No comments