manualshive.com logo in svg

Dell PowerEdge R730, Owner'S Manual

The Dell PowerEdge R730 is a powerful server that delivers exceptional performance for a wide range of demanding applications. To fully utilize all its features, a comprehensive Technical Manual is essential. Download the user manual for free from our website manualshive.com to maximize your understanding and utilization of this remarkable product.

Share
Download
background image

Example

Menu Item

Description

System Profile

Sets the system profile. If you set the 

System Profile

 option to a mode other than 

Custom

, the BIOS automatically sets the rest of the options. You can only change 

the rest of the options if the mode is set to 

Custom

. By default, the 

System Profile 

option is set to 

Performance Per Watt Optimized (DAPC)

. DAPC is Dell Active 

Power Controller.

NOTE: The following parameters are available only when the 

System Profile

 is 

set to 

Custom

.

CPU Power 
Management

Sets the CPU power management. By default, the 

CPU Power Management 

option 

is set to 

System DBPM (DAPC)

. DBPM is Demand-Based Power Management.

Memory 
Frequency

Sets the speed of the system memory. You can select 

Maximum Performance

, 

Maximum Reliability

, or a specific speed.

Turbo Boost

Enables or disables the processor to operate in turbo boost mode. By default, the 

Turbo Boost

 option is set to 

Enabled

.

Energy Efficient 
Turbo

Enables or disables the 

Energy Efficient Turbo

.

Energy Efficient Turbo (EET) is a mode of operation where a processor’s core 
frequency is adjusted within the turbo range based on workload.

C1E

Enables or disables the processor to switch to a minimum performance state when 
it is idle. By default, the 

C1E

 option is set to 

Enabled

.

C States

Enables or disables the processor to operate in all available power states. By 
default, the 

C States

 option is set to 

Enabled

.

Collaborative CPU 
Performance 
Control

Enables or disables the CPU power management. When set to 

Enabled

, the CPU 

power management is controlled by the OS DBPM and the System DBPM (DAPC). 
By default, the option is set to 

Disabled

.

Memory Patrol 
Scrub

Sets the memory patrol scrub frequency. By default, the 

Memory Patrol Scrub 

option is set to 

Standard

.

Memory Refresh 
Rate

Sets the memory refresh rate to either 1x or 2x. By default, the 

Memory Refresh 

Rate 

option is set to 

1x

.

Uncore Frequency

Selects the 

Processor Uncore Frequency

.

Dynamic mode allows the processor to optimize power resources across the cores 
and uncore during runtime. The optimization of the uncore frequency to either 
save power or optimize performance is influenced by the setting of the 

Energy 

Efficiency Policy

.

Energy Efficient 
Policy

Selects the 

Energy Efficient Policy

.

The CPU uses the setting to manipulate the internal behavior of the processor and 
determines whether to target higher performance or better power savings.

46

Summary of Contents for PowerEdge R730

















































































































































































































Reviews:

No comments

Related manuals for PowerEdge R730

IBM 150 User Reference Manual preview
150
Brand: IBM Pages: 180
Samsung SRD-1670DC Properties preview
SRD-1670DC
Brand: Samsung Pages: 7
3Com OfficeConnect 3C19500 User Manual preview
OfficeConnect 3C19500
Brand: 3Com Pages: 52
Advantech EKI-1526 User Manual preview
EKI-1526
Brand: Advantech Pages: 96
Silex technology PRICOM PRICOM C- 5100 User Manual preview
PRICOM PRICOM C- 5100
Brand: Silex technology Pages: 7
Asus AAEON ARES-WHI0 User Manual preview
AAEON ARES-WHI0
Brand: Asus Pages: 76
Asus TS100-E5/PI4 Configuration Manual preview
TS100-E5/PI4
Brand: Asus Pages: 16
Asus VivoPC User Manual preview
VivoPC
Brand: Asus Pages: 42
Asus RS720A-E9-RS24-E User Manual preview
RS720A-E9-RS24-E
Brand: Asus Pages: 162
Asus RS700D-E6 RS8 User Manual preview
RS700D-E6 RS8
Brand: Asus Pages: 164
Asus TS700-E9 Series User Manual preview
TS700-E9 Series
Brand: Asus Pages: 178
Asus TS300-E4 User Manual preview
TS300-E4
Brand: Asus Pages: 224
Asus RS920A-E6/RS8 User Manual preview
RS920A-E6/RS8
Brand: Asus Pages: 162
Asus RS720Q-E8-RS12 User Manual preview
RS720Q-E8-RS12
Brand: Asus Pages: 196
Asus RS720Q-E9-RS24-S User Manual preview
RS720Q-E9-RS24-S
Brand: Asus Pages: 150
Asus TS500-E5 - 0 MB RAM User Manual preview
TS500-E5 - 0 MB RAM
Brand: Asus Pages: 162
Asus ASMB3-SOL User Manual preview
ASMB3-SOL
Brand: Asus Pages: 70
Asus TS110-E8-PI4 User Manual preview
TS110-E8-PI4
Brand: Asus Pages: 146

Brands by name

Popular brands

Load more brands