manualshive.com logo in svg

Dell PowerEdge R730, Owner'S Manual

Share
Download
Dell PowerEdge R730 Owner'S Manual Download Page 49

Menu Item

Description

Authorized 
Signature 
Database

Imports, exports, deletes, or restores entries in the Authorized Signature Database 
(db).

Forbidden 
Signature 
Database

Imports, exports, deletes, or restores entries in the Forbidden Signature Database 
(dbx).

Miscellaneous Settings screen details

You can use the 

Miscellaneous Settings

 screen to perform specific functions such as updating the asset 

tag, and changing the system date and time.
You can view the 

Miscellaneous Settings

 screen by clicking 

System Setup Main Menu

 → 

System BIOS

 → 

Miscellaneous Settings

.

The 

Miscellaneous Settings

 screen details are explained as follows:

Example

Menu Item

Description

System Time

Enables you to set the time on the system.

System Date

Enables you to set the date on the system.

Asset Tag

Displays the asset tag and enables you to modify it for security and tracking 
purposes.

Keyboard 
NumLock

Enables you to set whether the system boots with the NumLock enabled or 
disabled. By default the 

Keyboard NumLock

 is set to 

On

.

NOTE: This option does not apply to 84-key keyboards.

F1/F2 Prompt on 
Error

Enables or disables the F1/F2 prompt on error. By default, 

F1/F2 Prompt on Error

 is 

set to 

Enabled

. The F1/F2 prompt also includes keyboard errors.

Load Legacy 
Video Option 
ROM

Enables you to determine whether the system BIOS loads the legacy video (INT 
10H) option ROM from the video controller. Selecting 

Enabled

 in the operating 

system does not support UEFI video output standards. This field is only for UEFI 
boot mode. You cannot set this to 

Enabled

 if 

UEFI Secure Boot

 mode is enabled.

In-System 
Characterization

This option enables or disables 

In-System Characterization

. By default, 

In-System 

Characterization

 is set to 

Disabled

. The two other options are

 Enabled

 and 

Enabled - No Reboot

.

NOTE: The default setting for 

In-System Characterization

 is subject to change 

in future BIOS releases.

When enabled, In-System Characterization (ISC) executes during POST upon 
detecting relevant change(s) in system configuration to optimize system power and 
performance. ISC takes about 20 seconds to execute, and system reset is required 
for ISC results to be applied. The 

Enabled - No Reboot

 option executes ISC and 

continues without applying ISC results until the next time system reset occurs. The 

Enabled

 option executes ISC and forces an immediate system reset so that ISC 

49

Summary of Contents for PowerEdge R730

















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands