manualshive.com logo in svg

Dell PowerEdge R730, Owner'S Manual

Share
Download
Dell PowerEdge R730 Owner'S Manual Download Page 42

Menu Item

Description

Port I

Sets the drive type of the selected device. For 

Embedded SATA settings

 in 

ATA 

mode, set this field to 

Auto

 to enable BIOS support. Set it to 

OFF

 to turn off BIOS 

support.
For 

AHCI

 mode or 

RAID

 mode, BIOS always enables support.

Model

Displays the drive model of the selected device.

Drive Type

Displays the type of drive attached to the SATA port.

Capacity

Displays the total capacity of the hard drive. The field is undefined for removable 
media devices such as optical drives.

Port J

Sets the drive type of the selected device. For 

Embedded SATA settings

 in 

ATA 

mode, set this field to 

Auto

 to enable BIOS support. Set it to 

OFF

 to turn off BIOS 

support.
For 

AHCI

 mode or 

RAID

 mode, BIOS always enables support.

Model

Displays the drive model of the selected device.

Drive Type

Displays the type of drive attached to the SATA port.

Capacity

Displays the total capacity of the hard drive. The field is undefined for removable 
media devices such as optical drives.

Boot Settings screen details

You can use the 

Boot Settings

 screen to set the Boot mode to either 

BIOS

 or 

UEFI

. It also allows you to 

specify the boot order.
You can view the 

Boot Settings

 screen by clicking 

System Setup Main Menu

 → 

System BIOS

 → 

Boot 

Settings

.

The 

Boot Settings

 screen details are explained as follows:

Example

Menu Item

Description

Boot Mode

Enables you to set the boot mode of the system.

CAUTION: Switching the boot mode may prevent the system from booting if 
the operating system is not installed in the same boot mode.

NOTE: Setting this field to 

UEFI

 disables 

BIOS Boot Settings

 menu. Setting this 

field to 

BIOS

 disables the 

UEFI Boot Settings

 menu.

If the operating system supports UEFI, you can set this option to 

UEFI

. Setting this 

field to 

BIOS

 allows compatibility with non-UEFI operating systems. By default, the 

Boot Mode

 option is set to 

BIOS

.

Boot Sequence 
Retry

Enables or disables the boot sequence retry feature. If this field is enabled and the 
system fails to boot, the system reattempts the boot sequence after 30 seconds. By 
default, the 

Boot Sequence Retry

 option is set to 

Enabled

.

Hard Disk Failover

Specifies which devices in the 

Hard-Disk Drive Sequence

 are attempted in the 

boot sequence. When the option is 

Disabled

, only the first hard disk device in the 

42

Summary of Contents for PowerEdge R730

















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands