Figure 23. Removing a hot swappable hard drive or SSD
1
release button
2
hard drive or SSD carrier
3
hard drive or SSD carrier handle
Related link
Safety instructions
Removing the optional front bezel
Installing the optional front bezel
Installing a hot-swap hard drive
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage
due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are
shipped with your product.
CAUTION:
Use only hard drives that have been tested and approved for use with the hard drive backplane.
CAUTION:
When installing a hard drive, ensure that the adjacent drives are fully installed. Inserting a hard drive carrier and
attempting to lock its handle next to a partially installed carrier can damage the partially installed carrier's shield spring and make
it unusable.
CAUTION:
Combining SAS and SATA hard drives in the same RAID volume is not supported.
CAUTION:
To prevent data loss, ensure that your operating system supports hot-swap drive installation. See the documentation
supplied with your operating system.
CAUTION:
When a replacement hot swappable hard drive is installed and the system is powered on, the hard drive automatically
begins to rebuild. Make absolutely sure that the replacement hard drive is blank or contains data that you wish to have over-
written. Any data on the replacement hard drive is immediately lost after the hard drive is installed.
Steps
1
If a hard drive blank is installed in the hard drive slot, remove it.
2
Install a hard drive in the hard drive carrier.
3
Press the release button on the front of the hard drive carrier and open the hard drive carrier handle.
4
Insert the hard drive carrier into the hard drive slot until the carrier connects with the backplane.
5
Close the hard drive carrier handle to lock the hard drive in place.
82
Installing and removing system components
