Dell PowerEdge R415, Owner'S Manual, Page: 64 / 188

64
Using the System Setup Program and UEFI Boot Manager
Integrated Devices Screen
Hard-Disk Drive
Sequence
Determines the order in which the BIOS will attempt to
boot from hard-drives in the system during system
startup.
USB Flash Drive
Emulation Type
( Auto default)
Determines the emulation type for a USB flash drive.
If Boot Mode is set to UEFI , this field is disabled.
Boot Sequence Retry
( Disabled default)
If this field is enabled and the system has failed to boot,
the system reattempts to boot after 30 seconds.
Option Description
Integrated SAS
Controller
( Enabled default)
Enables or disables the integrated SAS controller.
User Accessible USB
Ports
(
All Ports On
default)
Enables or disables the user-accessible USB ports. Options
are All Ports On , Only Back Ports On , and All Ports Off .
Internal USB Port 1
( On default)
Enables or disables the internal USB port.
Internal USB Port 2
( On default)
Enables or disables the internal USB port.
Embedded NIC1 and
NIC2 ( Enabled default)
Enables or disables the operating system interface of the
embedded NICs. The NICs may also be accessed through
the system’s management controller.
Embedded Gb NIC x
( Enabled default)
Enables or disables the integrated NIC. Options are
Enabled and Enabled with PXE . PXE support allows the
system to boot from the network.
MAC Address Displays the MAC address for the integrated 10/100/1000
NIC.
Option Description
R415HOM.book Page 64 Friday, September 24, 2010 9:37 AM