Dell PowerEdge R415 Owner'S Manual Download Page 169

Page: 169 / 188

Running the System Diagnostics

169

Running the System Diagnostics

If you experience a problem with your system, run the diagnostics before

calling for technical assistance. The purpose of the diagnostics is to test your

system's hardware without requiring additional equipment or risking data

loss. If you are unable to fix the problem yourself, service and support

personnel can use diagnostics test results to help you solve the problem.

Using Dell Diagnostics

To assess a system problem, first use the online diagnostics. Online

Diagnostics is a suite of diagnostic programs, or test modules, that include

diagnostic tests on chassis and storage components such as hard drives,

physical memory, communications and printer ports, NICs, CMOS, and

more. If you are unable to identify the problem using the Online Diagnostics,

then use the embedded system diagnostics.
The files required to run Online Diagnostics for systems running supported

Microsoft Windows and Linux operating systems are available at

support.dell.com

and on the media that came with your system. For

information about using diagnostics, see the

Dell Online Diagnostics User's

Guide

support.dell.com/manuals

located under systems management

software.

Embedded System Diagnostics Features

The system diagnostics provides a series of menus and options for particular

device groups or devices. The system diagnostics menus and options allow

you to:

• Run tests individually or collectively
• Control the sequence of tests
• Repeat tests
• Display, print, or save test results
• Temporarily suspend testing if an error is detected or terminate testing

when a user-defined error limit is reached

R415HOM.book Page 169 Friday, September 24, 2010 9:37 AM

Summary of Contents for PowerEdge R415





























































































































































































Search results

Summary of Contents for PowerEdge R415

Reviews:

Related manuals for PowerEdge R415

Brands by name

Popular brands

Dell PowerEdge R415, Owner'S Manual

Search results

Summary of Contents for PowerEdge R415

Reviews:

Related manuals for PowerEdge R415

Brands by name

Popular brands