System Setup Program
A-3
7DEOH$6\VWHP6HWXS2SWLRQV
2SWLRQ
)XQFWLRQ
Time
Resets time on computer’s internal clock.
Date
Resets date on computer’s internal calendar.
Diskette Drive A
Diskette Drive B
Identifies type of diskette drives installed.
Tape drives are
not reflected.
Reserved Memory
Allows a region of system board memory to
be supplied by an expansion card with
15M -
16M
or
None
(default).
CPU Speed
Indicates the processor speed at which the
system boots (can toggle to a lower speed).
This option should be used only for trouble-
shooting purposes; otherwise, do not use.
Num Lock
On 101- and 102-key keyboards, determines
whether system boots with Num Lock acti-
vated (does not apply to 84-key keyboards).
Processor 1
Processor 2
Displays version or stepping number of the
microprocessor in each processor slot on the
system board.
Fan Speed
Sets the fan speed to
Full Speed
(default) or
Noise Reduced
.
System Alert
Sets the system LED to flash when a critical
(
Fault
, the default) or noncritical (
Warning
)
error threshold is passed.
Keyboard Errors
Enables or disables reporting of keyboard
errors during POST.
Boot Sequence
Determines whether system boots from dis-
kette (if present) or hard-disk drive.
Scan Sequence
Determines the order in which the PCI devices
are scanned by the system.
System Password
Displays current status of system’s password
security feature. Also used to assign and verify
a new password. The system password is
overridden by the setup password.
Password Status
If set to
Locked
, prevents the system pass-
word from being changed or disabled.
Requires that
Setup Password
option be set
to
Enabled
.
Setup Password
Restricts access to System Setup program.
The setup password overrides the system
password.
Mouse
Enables or disables the built-in PS/2-
compatible mouse port.
