7-4
Installation and Troubleshooting Guide
Figure 7-2. Removing the Computer Cover
Replacing the Computer Cover
Use the following procedure to replace the computer cover:
1.
Check all cable connections, especially those that might have come loose during
your work. Fold cables out of the way so that they do not catch on the computer
cover. Make sure cables are not routed over the drive cage—they will prevent the
cover from closing properly.
2.
Check to see that no tools or extra parts (including screws) are left inside the
computer's chassis.
3.
Replace the cover.
4.
Facing the left side of the computer, hold the cover at a slight angle as shown in
Figure 7-3, and then align the top of the cover with the top of the chassis. Hook
release button
905grbk0.book Page 4 Friday, September 1, 2000 9:30 AM
