1-8
I n s t a l l i n g o r R e p l a c i n g a n E R A / O C a r d
www
.dell.com | support.dell.com
Removing an ERA/O Card
NOTICE:
Do not attempt to disconnect the ERA/O card from the connector on the
system board until you have unfastened the card from each of the four support posts.
1
Unfasten each of the support posts from the card:
a
Compress the clasp at the top of the support post while carefully lifting up on the
corner of the card to unseat the post. See Figure 1-7.
b
Repeat step a for each support post.
2
Lift the ERA/O card straight up and out of the chassis.
F i g u r e 1 - 7 .
R e m o v i n g a n E R A / O C a r d
ERA/O card
connector
ERA/O card
system board
support posts (4)
mounting holes (4)
5U106ebk3.book Page 8 Tuesday, April 15, 2003 1:22 PM
