I n s t a l l i n g o r R e p l a c i n g a n E R A / O C a r d
1-3
5
Remove any full-length expansion cards. If you do not have any expansion cards
installed, skip to step 6.
a
Unfasten and remove the expansion-card latch. See Figure 1-2.
b
Disconnect any cables attached to the card.
c
Grasp the expansion card by its edges, and remove it from the expansion-card
connector on the system board.
F i g u r e 1 - 2 .
R e m o v i n g a F u l l - L e n g t h E x p a n s i o n C a r d ( I f I n s t a l l e d )
expansion-card
latch
5U106ebk3.book Page 3 Tuesday, April 15, 2003 1:22 PM
