Dell PowerEdge 2300, Service Manual

Page: 43 / 84

Codes and Messages 3-7
Memory
address line
failure at
address, read
value expect-
ing
value
Memory double
word logic
failure at
address, read
value expect-
ing
value
Memory odd/
even logic
failure at
address, read
value expect-
ing
value
Memory write/
read failure
at
address,
read
value
expecting
value
Faulty or improperly
seated DIMMs or defec-
tive system board Remove and reseat the
DIMMs. If the problem
persists, replace the
DIMMs. If the problem still
persists, replace the sys-
tem board.
Memory allo-
cation error
Faulty application Restart the application.
Memory
parity
interrupt at
address
Improperly seated or faulty
DIMMs Remove and reseat the
DIMMs. If the problem
persists, replace the
DIMMs.
Memory tests
terminated
by keystroke
POST memory test termi-
nated by pressing the
<Spacebar> No action is required.
No boot
device
available
Faulty diskette, diskette-
drive subsystem, hard-disk
drive, hard-disk drive sub-
system, or no boot disk in
drive A Replace the diskette or
hard-disk drive. If the prob-
lem persists, replace the
system board.
No boot
sector on
hard-disk
drive
Incorrect configuration set-
tings in System Setup
program, or no operating
system on hard-disk drive Check the hard-disk drive
configuration settings in
the System Setup
program.
No timer
tick
interrupt
Defective system board Replace the system board.
7DEOH6\VWHP0HVVDJHV FRQWLQXHG
0HVVDJH &DXVH &RUUHFWLYH$FWLRQ