Dell PowerEdge 2300, Service Manual

Page: 42 / 84

3-6 Dell PowerEdge 2300 Systems Service Manual
I/O parity
interrupt at
address
Expansion card im-
properly installed or faulty Reinstall the expansion
cards. If the problem per-
sists, replace the
expansion card.
Invalid con-
figuration
information -
please run
SETUP program
Incorrect ISA_CLR jumper
configuration, incorrect
configuration settings in
System Setup program, or
faulty battery Remove the plug from the
ISA_CLR jumper. Check
the system configuration
settings in the System
Setup program. Replace
the battery.
Invalid CPU
speed
detected -
check
jumpers
Incorrect microprocessor
jumper configuration Check the microprocessor
speed jumper.
Invalid
NVRAM con-
figuration,
resource
reallocated
System detected and cor-
rected a resource conflict
when system resources
were allocated using the
Resource Configuration
Utility No action is required.
Keyboard
clock line
failure
Keyboard
failure
Keyboard cable connector
loose or improperly con-
nected, defective
keyboard, or defective
keyboard/mouse control-
ler (defective system
board) Check the keyboard cable
connection. Replace the
keyboard. If the problem
persists, replace the sys-
tem board.
Keyboard
controller
failure
Defective keyboard/mouse
controller (defective sys-
tem board) Replace the system board.
Keyboard
data line
failure
Keyboard
stuck key
failure
Keyboard cable connector
loose or improperly
connected, defective key-
board, or defective key-
board/mouse controller
(defective system board) Check the keyboard cable
connection. Replace the
keyboard. If the problem
persists, replace the sys-
tem board.
7DEOH6\VWHP0HVVDJHV FRQWLQXHG
0HVVDJH &DXVH &RUUHFWLYH$FWLRQ