436
LLDP Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\LLDP.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 5 / 1 5 /1 2 - F O R P R O O F O N LY
Parameters
•
number
—Network policy sequential number.
•
application
—The name or the number of the primary function of the
application defined for this network policy. Available application names
are: voice, voice-signaling, guest-voice, guest-voice-signaling, softphone-
voice, video-conferencing, streaming-video, video-signaling.
•
vlan id
—VLAN identifier for the application.
•
vlan-type
—Specifies if the application is using a Tagged or an Untagged
VLAN.
•
up priority
—User Priority (Layer 2 priority) to be used for the specified
application.
•
dscp value
—DSCP value to be used for the specified application.
Default
No Network policy is defined.
Command Mode
Global Configuration mode
User Guidelines
Use the
lldp med network-policy
Interface Configuration command to
attach a network policy to a port.
Up to 32 network policies can be defined.
Example
console(config)#
lldp med network-policy
1 voice-signaling vlan 1
lldp med network-policy (interface)
Use the
lldp med network-policy
Interface Configuration (Ethernet) mode
command to attach or remove an LLDP MED network policy on an interface.
Use the
no
form of this command to remove all the LLDP MED network
policies from the interface.