Ethernet Configuration Commands
339
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Ethernet.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 5/ 1 5 /1 2 - F O R PR O O F O N LY
set interface active
Use the
set interface active
EXEC mode command to reactivate an interface
that was shut down.
Syntax
set interface active
{ interface-id }
Parameters
interface-id
—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Command Mode
EXEC mode
User Guidelines
This command is used to activate interfaces that were configured to be active,
but were shut down by the system.
Example
The following example reactivates
gigabitethernet
port
1/0/
1.
Console#
set interface active
gigabitethernet 1/0/1
show interfaces configuration
Use the
show interfaces configuration
EXEC mode command to display the
configuration for all configured interfaces or for a specific interface.
Syntax
show interfaces configuration
[interface-id ]
Parameters
interface-id
—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
