Address Table Commands
399
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Address_Table.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 5/ 1 5 /1 2 - F O R PR O O F O N LY
Default Configuration
No addresses are defined.
Command Mode
Interface Configuration (Ethernet, port-channel) mode. It cannot be
configured for a range of interfaces (range context).
User Guidelines
This command enables adding secure MAC addresses to a routed port in port
security mode. The command is available when the port is a routed port and
in port security mode. The address is deleted if the port exits the security
mode or is not a routed port.
This command is required because the
bridge address
command cannot be
executed on internal VLANs.
Example
The following example adds the MAC-layer address 66:66:66:66:66:66 to
gigabitethernet port 1/0/1.
Console(config)#
interface
gigabitethernet 1/0/1
Console(config-if)#
port security routed secure-address
66:66:66:66:66:66
show mac address-table
Use the
show mac address-table
EXEC command to view entries in the MAC
address table.
Syntax
show mac address-table
[dynamic | static| secure] [vlan vlan] [interface
interface-id] [address mac-address]
Parameters
•
dynamic
—Displays only dynamic MAC address table entries.
•
static
—Displays only static MAC address table entries.
•
secure
—Displays only secure MAC address table entries.
