Address Table Commands
389
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Address_Table.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 5/ 1 5 /1 2 - F O R PR O O F O N LY
Static multicast addresses can be defined on static VLANs only.
You can execute the command before the VLAN is created.
Example
The following example registers the MAC address to the bridge table:
Console(config)#
interface vlan
8
Console(config-if)#
bridge multicast address
01:00:5e:02:02:03
The following example registers the MAC address and adds ports statically.
Console(config)#
interface vlan
8
Console(config-if)#
bridge multicast address
01:00:5e:02:02:03
add
gi1/0/1-2
bridge multicast forbidden address
Use the
bridge multicast forbidden address
Interface Configuration (VLAN)
mode command to forbid adding or removing a specific multicast address to
or from specific ports. Use the
no
form of this command to restore the default
configuration.
Syntax
bridge multicast forbidden address
{
mac-multicast-address
}
{add | remove}
{ethernet interface-list | port-channel port-channel-list
}
no bridge multicast forbidden address
{
mac-multicast-address
}
Parameters
•
mac-multicast-address
—Specifies the group MAC multicast address.
•
add
—Forbids adding ports to the group.
•
remove
—Forbids removing ports from the group.
•
ethernet
interface-list
—Specifies a list of Ethernet ports. Separate
nonconsecutive Ethernet ports with a comma and no spaces. Use a hyphen
to designate a range of ports.
