Dell PowerConnect B - MLXe 16, Hardware Installation Manual

Page: 170 / 212

158 PowerConnect B-MLXe Hardware Installation Guide
53-1002111-01
Diagnostic error codes and remedies for TFTP transfers
6
Reloading at a specific time
For example, to schedule a system reload from the primary flash memory module for 6:00:00 AM,
January 19, 2011, enter the following command at the Privileged EXEC level of the CLI.
PowerConnect# reload at 06:00:00 01-19-2011
Syntax: reload at <hh:mm:ss> <mm-dd-yy> [primary | secondary]
•
<hh:mm:ss> is the hours, minutes, and seconds.
•
<mm-dd-yy> is the month, day, and year.
•
primary | secondary specifies whether the reload is to occur from the primary flash memory
module or the secondary flash memory module. The default is primary.
Reloading after a specific amount of time
For example, to schedule a system reload from the secondary flash memory one day and 12 hours
from the current time, enter the following command at the Privileged EXEC level of the CLI.
PowerConnect# reload after 01:12:00 secondary
Syntax: reload after <dd:hh:mm> [primary | secondary]
•
<dd:hh:mm> is the number of days, hours, and minutes.
•
primary | secondary specifies whether the reload is to occur from the primary flash memory
module or the secondary flash memory module.
Displaying the amount of time before a
scheduled reload
To display how much time is left before a scheduled reload, enter the show reload command from
any level of the CLI.
Syntax: show reload
Canceling a scheduled reload
To cancel a scheduled reload, enter the reload cancel command at the Privileged EXEC level of the
CLI.
Syntax: reload cancel
Diagnostic error codes and remedies for
TFTP transfers
If an error occurs during a TFTP transfer to or from a router, one of the following error codes is
displayed.