98
PowerConnect B-MLXe Hardware Installation Guide
53-1002111-01
Testing network connectivity
4
Syntax: ping
<ip addr>
|
<hostname>
[source
<ip addr>
] [count
<num>
] [timeout
<msec>
] [ttl
<num>
] [size
<byte>
] [quiet] [numeric] [no-fragment] [verify] [data
<1-to-4 byte hex>
]
[brief]
The maximum allowable size is 9170 bytes.
NOTE
If you send the ping to the IP broadcast address, the device lists the first four responses to the ping.
Tracing a route
To determine the path through which the router can reach another network device, enter a
command such as the following at any level of the CLI.
NetIron> traceroute 192.33.4.7
Syntax: traceroute
<host-ip-addr>
[maxttl
<value>
] [minttl
<value>
] [numeric] [timeout
<value>
]
[source-ip
<ip addr>
]
The CLI displays traceroute information for each hop on the route as soon as the information is
received. Traceroute requests display all responses to a given TTL. If there are multiple equal-cost
routes to the destination, the router displays up to three responses by default.
Summary of Contents for PowerConnect B - MLXe 16
Page 1: ...53 1002111 01 02 November 2010 PowerConnect B MLXe Hardware Installation Guide ...
Page 194: ...182 PowerConnect B MLXe Hardware Installation Guide 53 1002111 01 Power cords 8 ...
Page 198: ...186 PowerConnect B MLXe Hardware Installation Guide 53 1002111 01 Russia A ...
Page 212: ...200 PowerConnect B MLXe Hardware Installation Guide 53 1002111 01 Dangers B ...
