Dell PowerConnect 7000 Series, Reference Manual

Page: 866 / 1730

866
DHCP Server and Relay Agent Commands
• Client DNS server – dns-server
• NetBIOS WINS Server – netbios-name-server
• NetBIOS Node Type – netbios-node-type
• Client default router – default-router
• Client address lease time – lease
Administrators may also configure manual bindings for clients using the
host
command in DHCP Pool Configuration mode. This is the most often used
for DHCP clients for which the administrator wishes to reserve an ip address,
for example a computer server or a printer. A DHCP pool can contain
automatic or dynamic address assignments or a single static address
assignment.
To configure a manual address binding, configure the pool properties using
the DHCP pool commands listed below. It is only necessary to configure a
DHCP client identifier or a BOOTP client MAC address for a manual
binding. To configure a manual binding, the client identifier or hardware
address must be specified before specifying the host address.
• DHCP client identifier – client-identifier
• BOOTP client MAC address – hardware-address
• Host address – host
• Client name (optional) – client-name
Examples
Example 1 – Manual Address Pool
console#ip dhcp pool “Printer LP32 R1-101”
console(config-dhcp-pool)#client-identifier
00:23:12:43:23:54
console(config-dhcp-pool)#host 10.1.1.1
255.255.255.255
console(config-dhcp-pool)#client-name
PRT_PCL_LP32_R1-101
Example 2 – Dynamic Address Pool
2CSPC4.XCT-SWUM2XX1.book Page 866 Monday, October 3, 2011 11:05 AM