manualshive.com logo in svg

Dell PowerConnect 7000 Series, Reference Manual

Share
Download
Dell PowerConnect 7000 Series Reference Manual Download Page 1389

Configuration and Image File Commands

1389

Images currently available on Flash

------------------------------------------------------------------

unit

image1

image2

current-active

next-active

------------------------------------------------------------------

1

0.31.0.0

0.31.0.0

image2

image2

show running-config

Use the

 show running-config

 command in Privileged EXEC mode to display 

the contents of the currently running configuration file, including banner 

configuration. The command only displays the configurations that are non-

default.

 

NOTE: 

All non-default configurations for the Captve Portal branding images and 

encoded Unicode are not displayed via the standard show running-config 

command. If desired, you can view this data in the script files or by using the all 

mode for the show running-config command. In addition, please note that this non-

readable data is contained and displayed at the end of the script files.

Syntax

show running-config 

[

all

 | 

scriptname

]

•

all

-—To display or capture the commands with settings and 

configuration that are equal to the default value, include the 

all

 

option.

•

scriptname

-—If the optional 

scriptname

 is provided, the output is 

redirected to a script file.

 

NOTE: 

If you issue the show running-config command from a serial connection, 

access to the switch through remote connections (such as Telnet) is suspended 

while the output is being generated and displayed.

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC mode

2CSPC4.XCT-SWUM2XX1.book  Page 1389  Monday, October 3, 2011  11:05 AM

Summary of Contents for PowerConnect 7000 Series



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands