Dell PowerConnect 7000 Series, Reference Manual

Page: 1538 / 1730

1538
SNMP Commands
console(config)# snmp-server filter user-filter
system.7 excluded
console(config)# snmp-server filter user-filter
ifEntry.*.1 included
snmp-server group
Use the snmp-server group command in Global Configuration mode to
configure a new Simple Management Protocol (SNMP) group or a table that
maps SNMP users to SNMP views. To remove a specified SNMP group, use
the no form of this command.
Syntax
snmp-server group
groupname
{ v1 | v2 | v3 { noauth | auth | priv } [
notify
notifyview
] } [ context
contextname
] [ read
readview
] [ write
writeview
]
no snmp-server group
groupname
{ v1 | v2 | v3 { noauth | auth | priv } } [
context
contextname
]
•
groupname
— Specifies the name of the group. (Range: 1-30 characters.)
• v1 — Indicates the SNMP Version 1 security model.
• v2 — Indicates the SNMP Version 2 security model.
• v3 — Indicates the SNMP Version 3 security model.
• noauth — Indicates no authentication of a packet. Applicable only to the
SNMP Version 3 security model.
• auth — Indicates authentication of a packet without encrypting it.
Applicable only to the SNMP Version 3 security model.
• priv — Indicates authentication of a packet with encryption. Applicable
only to the SNMP Version 3 security model.
•
contextname
— Provides different views of the system and provides the
user a way of specifying that context.
•
notifyview
— Defines a string that is the name of the view that enables
specifying an inform or a trap. If unspecified, nothing is defined for the
notify view. (Range: 1-30 characters.)
2CSPC4.XCT-SWUM2XX1.book Page 1538 Monday, October 3, 2011 11:05 AM