Dell PowerConnect 7000 Series, Reference Manual

Page: 1588 / 1730

1588
System Management Commands
<cr> Press enter to execute the command.
console(config-stack)#initiate failover
Management unit will be reloaded.
Are you sure you want to failover to the backup unit?
(y/n) y
locate
Use the locate command to locate a switch by LED blinking.
Syntax
locate [ switch
unit
] [ time
time
]
Parameter Description
Default Configuration
Default value is 20 seconds.
Command Mode
Privileged EXEC
User Guidelines
The LED will blink green until it times out. The user may select a new time
value while the LED is blinking. The last value selected takes effect
immediately. The locate command does not persist across reboots.
Example
console# locate switch 1 time 555
Parameter Description
switch
unit
If multiple devices are stacked, you can choose which
switch to identify.
time time
LED blinking duration in seconds. Range 1-3600 seconds.
2CSPC4.XCT-SWUM2XX1.book Page 1588 Monday, October 3, 2011 11:05 AM