Dell PowerConnect 7000 Series, Reference Manual

Page: 255 / 1730

AAA Commands
255
Default Configuration
No password is specified.
Command Mode
Line Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example specifies a password "mcmxxyyy" on a line.
console(config-line)# password mcmxxyyy
password
(User EXEC)
Use the password command in User EXEC mode to allow a currently logged
in user to change the password for only that user without having read/write
privileges. This command should be used after the password has aged. The
user is prompted to enter the old password and the new password.
NOTE:
For commands that configure password properties, see Password
Management Commands.
Syntax
password
Parameter Description
This command does not require a parameter description.
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC mode
2CSPC4.XCT-SWUM2XX1.book Page 255 Monday, October 3, 2011 11:05 AM