Dell PowerConnect 6224, Command Line Interface Manual

Page: 1155 / 1372

Management ACL Commands
1155
The following example shows how to configure all the interfaces to be
management interfaces except for two interfaces, Ethernet 1/g1 and Ethernet
2/g9.
console(config)# management access-list mlist
console(config-macal)# deny ethernet 1/g1 priority
<1-64>
console(config-macal)# deny ethernet 2/g9 priority
<1-64>
console(config-macal)# permit priority <1-64>
console(config-macal)# exit
console(config)# management access-class mlist
show management access-class
Use the show management access-class command in Privileged EXEC mode
to display information about the active management access list.
Syntax
show management access-class
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the management access-list information.
console# show management access-class