manualshive.com logo in svg

Dell PowerConnect 6224, Command Line Interface Manual, Page: 166 / 1372

Share
Download
Dell PowerConnect 6224 Command Line Interface Manual Download Page 166

166

Using the CLI

configuration file. In this case, if the local configuration file does not exist, 

then it is created by the command. If it does exist, it is overwritten. If there is 

not enough space on the local file system to accommodate the file, an error is 

flagged.
Refer to the 

copy

 command description in the Layer 2 commands section of 

the guide for command details.

Referencing External/Internal File systems

Configuration or software images are copied to or retrieved from remote file 

systems using TFTP and XMODEM protocols. 

• tftp://server-name/path/filename  — identifies a file on a remote file 

system accessible through the server-name. Trivial file transfer protocol is 

a simplified FTP and uses a UDP port instead of TCP and does not have 

password protection.

• xmodem: filename — identifies the file available on the XMODEM 

connection.

Special System Files

The following special filenames are used to refer to special virtual system files, 

which are under control of the system and may not be removed or added. 

These file names are reserved and may not be used as user-defined files. 

When the user copies a local source file into one of these special files and the 

source file has an attached file description, it also is copied as the file 

description for the special file. 

•

backup-config 

— This file refers to the backup configuration file.

•

running-config 

— This file refers to the configuration file currently active 

in the system. It is possible to copy the running-config image to a backup-

config file or to the startup-config file.

•

startup-config

 — This file refers to the special configuration image stored 

in flash memory which is loaded when the system next reboots. The user 

may copy a particular configuration file (remote or local) to this special file 

name and reboot the system to force it to use a particular configuration.

•

image1 & image2 

— These files refer to software images. One of these will 

be loaded when the system next reboots. Either image1 or image2 can be 

chosen for the next reboot using the command 

boot system.

Summary of Contents for PowerConnect 6224





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments