Dell PowerConnect 6224, Command Line Interface Manual, Page: 800 / 1372

800
IPv6 Routing Commands
The following information is displayed if the operational mode of the MLD
interface is enabled:
Query Interval This field indicates the configured query interval for the
interface.
Query Max
Response Time
This field indicates the configured maximum query response
time (in seconds) advertised in MLD queries on this interface.
Robustness This field displays the configured value for the tuning for the
expected packet loss on a subnet attached to the interface.
Startup Query
Interval
This value indicates the configured interval between General
Queries sent by a Querier on startup.
Startup Query
Count
This value indicates the configured number of Queries sent out
on startup, separated by the Startup Query Interval.
Last Member
Query Interval
This value indicates the configured Maximum Response Time
inserted into Group-Specific Queries sent in response to Leave
Group messages.
Last Member
Query Count
This value indicates the configured number of Group-Specific
Queries sent before the router assumes that there are no local
members.
Querier Status This value indicates whether the interface is a MLD querier or
non-querier on the subnet with which it is associated.
Querier Address The IP address of the MLD querier on the subnet the interface
with which it is associated.
Querier Up Time Time elapsed in seconds since the querier state has been
updated.
Querier Expiry
Time
Time left in seconds before the Querier losses its title as querier.
Wrong Version
Queries
Indicates the number of queries received whose MLD version
does not match the MLD version of the interface.
Number of Joins The number of times a group membership has been added on
this interface.
Number of Leaves The number of times a group membership has been removed on
this interface.
Number of Groups The current number of membership entries for this interface.