manualshive.com logo in svg

Dell PowerConnect 5424, Command Line Interface Manual

Share
Download
Dell PowerConnect 5424 Command Line Interface Manual Download Page 74

74

Command Modes

VC (VLAN Configuration) Mode

show rmon alarm-table

Displays the alarms summary table.

show rmon collection history

Displays the requested history group configuration.

show rmon events

Displays the RMON event table.

show rmon history

Displays RMON Ethernet Statistics history.

show rmon log

Displays the RMON logging table.

show rmon statistics

Displays RMON Ethernet Statistics.

show system

Displays system information.

show system id

Displays the service id information.

show system mode

Displays information on features control

service cpu-utilization

Displays information about the active users.

show version

Displays the system version information.

Command

Description

bridge address

Adds a static MAC-layer station source address to the bridge table. 

bridge multicast address

Registers MAC-layer Multicast addresses to the bridge table, and adds 
static ports to the group.

bridge multicast forbidden address

Forbids adding a specific Multicast address to specific ports. 

bridge multicast forbidden forward-all

Enables forbidding forwarding of all Multicast frames to a port.

bridge multicast forward-all

Enables forwarding of all Multicast frames on a port.

ip igmp snooping (Interface)

Enables Internet Group Management Protocol (IGMP) snooping on a 
specific VLAN. 

ip igmp snooping leave-time-out

Configures the host-time-out.

show ip igmp snooping mrouter

Enables automatic learning of Multicast router ports in the context of a 
specific VLAN.

ip igmp snooping mrouter-time-out

Configures the mrouter-time-out.

vlan

Creates a VLAN.

5400_CLI.book  Page 74  Wednesday, December 17, 2008  4:33 PM

Summary of Contents for PowerConnect 5424

































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands