manualshive.com logo in svg

Dell PowerConnect 5424, Command Line Interface Manual

Share
Download
Dell PowerConnect 5424 Command Line Interface Manual Download Page 497

802.1x Commands

497

Examples

The following command sets the number of seconds that the switch waits for a response to an EAP - 
request/identity frame, to 3600 seconds.

dot1x max-req

The 

dot1x max-req

 Interface Configuration mode command sets the maximum number of times that 

the switch sends an Extensible Authentication Protocol (EAP) - request/identity frame (assuming that 
no response is received) to the client, before restarting the authentication process. Use the 

no

 form of 

this command to return to the default setting.

Syntax

•

dot1x max-req

 

count

 

•

no dot1x max-req

 

•

count — 

Number of times that the switch sends an EAP - request/identity frame before restarting 

the authentication process. (Range: 1 - 10)

Default Configuration

Maximum number of times switch sends EAP request/identity frame to the client before restarting 
the authentication process is 

twice

.

Command Mode 

Interface Configuration (Ethernet) mode.

User Guidelines

•

You should change the default value of this command only to adjust for unusual circumstances, 
such as unreliable links or specific behavioral problems with certain clients and authentication servers.

Examples

The following example sets the number of times that the switch sends an EAP - request/identity frame, 
to 6 .

Console (config)# 

interface ethernet 

g8

Console (config-if)# 

dot1x timeout tx-period 

3600

Console (config)# 

interface ethernet 

g8

Console (config-if)# 

dot1x max-req 

6

5400_CLI.book  Page 497  Wednesday, December 17, 2008  4:33 PM

Summary of Contents for PowerConnect 5424

































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands