manualshive.com logo in svg

Dell PowerConnect 5424, Command Line Interface Manual

Share
Download
Dell PowerConnect 5424 Command Line Interface Manual Download Page 501

802.1x Commands

501

The following table describes the significant fields shown in the display:

Console# 

show

 

dot1x ethernet

 g3

Interface

Admin Mode

Oper Mode

Reauth 

Control

Reauth Period

Username

g3

Auto

Unauthorized

Ena

3600

Clark

State: held

Quiet period: 60

Tx period: 30

Max req: 2

Login Time: n/a

Last Authentication: n/a

MAC Address: 00:08:78:32:98:78

Authentication Method: Remote

Termination Cause: Supplicant logoff

Field

Description

Interface

The interface number.

Admin mode

The admin mode of the port. Possible values are: Force-auth, Force-unauth, Auto

Oper mode

The oper mode of the port. Possible values are: Authorized, Unauthorized. 

Reauth Control

Reauthentication control.

Reauth Period

Reauthentication period.

Username

The User-Name representing the identity of the Supplicant.

State 

The current value of the Authenticator PAE state machine.

Quiet period

The number of seconds that the switch remains in the quiet state following a failed 
authentication exchange (for example, the client provided an invalid password).

Tx period

The number of seconds that the switch waits for a response to an Extensible 
Authentication Protocol (EAP)-request/identity frame from the client before resending 
the request.

Max req

The maximum number of times that the switch sends an Extensible Authentication 
Protocol (EAP)-request/identity frame (assuming that no response is received) to the 
client before restarting the authentication process.

5400_CLI.book  Page 501  Wednesday, December 17, 2008  4:33 PM

Summary of Contents for PowerConnect 5424

































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands