manualshive.com logo in svg

Dell PowerConnect 5424, Command Line Interface Manual

Share
Download
Dell PowerConnect 5424 Command Line Interface Manual Download Page 485

Web Server

485

ip https certificate 

The 

ip https certificate

 Global Configuration mode command configures the active certificate for 

HTTPS. Use the 

no

 form of this command to return to default.

Syntax

•

ip https certificate 

number

•

no ip https certificate

•

number

 — Specifies the certificate number. (Range: 1 - 2)

Default Configuration

Certificate number 1.

Command Mode

Global Configuration mode.

User Guidelines

•

The 

crypto certificate generate

 command should be used in order to generate HTTPS certificates.

Example

The following example configures the active certificate for HTTPS.

crypto certificate import pkcs12

The 

crypto certificate import pkcs12

 Privileged EXEC mode command, imports the certificate and the 

RSA keys within a PKCS12 file.

Syntax

•

crypto certificate

 

number

 

import pkcs12

 

passphrase

•

number

 — Specifies the certificate number. (Range: 1 - 2)

•

passphrase

 — Passphrase that is used to encrypt the PKCS12 file for export. (Range: 8 - 96)

Default Configuration

There is no default configuration for this command.

Command Mode

Privileged EXEC mode.

User Guidelines

•

The passphrase that was exported by the 

crypto certificate export pkcs12

 command should be used. 

Please note that this passphrase would be saved for later exports.

Console (config)# 

ip https certificate

 1

5400_CLI.book  Page 485  Wednesday, December 17, 2008  4:33 PM

Summary of Contents for PowerConnect 5424

































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands