manualshive.com logo in svg

Dell PowerConnect 5424, Command Line Interface Manual

Share
Download
Dell PowerConnect 5424 Command Line Interface Manual Download Page 446

446

User Interface

Command Mode

Line Configuration mode.

User Guidelines

•

There are no user guidelines for this command.

Example

The following example enables the command history function for telnet.

terminal datadump

The 

terminal datadump

 EXEC mode command enables dumping of all the output from the show 

command without ’prompting’. Use the 

no

 form of this command to disable dumping. 

Syntax

•

terminal datadump

•

no terminal datadump

Default Configuration

Data dump is disabled.

Command Mode

Privilege EXEC command mode.

User Guidelines

•

By default when output continues beyond what is displayed on the screen, the CLI displays a 

--More--

 

prompt. Pressing Return displays the next line; pressing the Spacebar displays the next output screen. 
The datadump feature enables the dumping of all the output immediately after entering the show 
command for the current terminal session. 

Example

The following example enables dumping of all the output from show command without ’prompting’.

Console (config)# 

line telnet

Console (config-line)# 

history

console# 

terminal datadump

5400_CLI.book  Page 446  Wednesday, December 17, 2008  4:33 PM

Summary of Contents for PowerConnect 5424

































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands