manualshive.com logo in svg

Dell PowerConnect 5424, Command Line Interface Manual

Share
Download
Dell PowerConnect 5424 Command Line Interface Manual Download Page 320

320

RMON Commands

Example

The following example displays RMON 1 alarms.

The following table describes the significant fields shown in the display:

Console# show rmon alarm 1

Alarm 1

-------

OID: 1.3.6.1.2.1.2.2.1.10.1

Last sample Value: 878128

Interval: 30

Sample Type: delta

Startup Alarm: rising

Rising Threshold: 8700000

Falling Threshold: 78

Rising Event: 1

Falling Event: 1

Owner: CLI

Field

Description 

OID

Monitored variable OID.

Last Sample Value

The statistic value during the last sampling period. For example, if the sample 
type is delta, this value is the difference between the samples at the beginning 
and end of the period. If the sample type is absolute, this value is the sampled 
value at the end of the period.

Alarm

Alarm index.

Owner

The entity that configured this entry.

Interval

The interval in seconds over which the data is sampled and compared with the 
rising and falling thresholds.

Sample Type

The method of sampling the variable and calculating the value compared against 
the thresholds. If the value is 

absolute

, the value of the variable is compared 

directly with the thresholds at the end of the sampling interval. If the value is 

delta

, the value of the variable at the last sample is subtracted from the current 

value, and the difference compared with the thresholds.

5400_CLI.book  Page 320  Wednesday, December 17, 2008  4:33 PM

Summary of Contents for PowerConnect 5424

































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands