Dell P106F Service Manual Download Page 71

Page: 71 / 85

Table 8. System setup options—Storage menu

Storage

Storage Interface

Port Enablement

Enables or disables onboard drives

Default: ON.

SMART Reporting

Enable SMART Reporting

Enables or disables the S.M.A.R.T(Self-Monitoring, Analysis, and Reporting
Technology) option on the system.

Default: OFF.

Drive Information

M.2 PCIe SSD-1

Provides information about the type and device on the computer.

Table 9. System setup options—Display menu

Storage

Display Brightness

Brightness on battery power

Sets the screen brightness when the computer is running on battery power.

Brightness on AC power

Sets the screen brightness when the computer is running on AC power.

EcoPower

Enables or disables EcoPower which increases the battery life by reducing the
screen brightness when appropriate.

Default: ON.

Full-Screen Logo

Displays full screen logo if the image matches screen resolution.

Default: OFF.

Table 10. System setup options—Connection menu

Connection

Network Controller Configuration

Integrated NIC

Allows pre-OS and early OS networking features to use any enabled NICs.

Enabled with PXE: Default

Wireless Device Enable

Enable or disable internal WLAN/Bluetooth devices.

WLAN

Default: ON.

Bluetooth

Default: ON.

Enable UEFI Network Stack

Allows pre-OS and early OS networking features to use any enabled NICs. This
may be used without the PXE turned on.

Default: ON.

HTTP(s) Boot Feature

HTTP(s) Boot

This platform has HTTP(s) Boot capabilities.

Default: ON.

NOTE:

Provisioning of the Certificate is necessary to connect to HTTPs

Boot server.

System setup

Summary of Contents for P106F






















































































Search results

Summary of Contents for P106F

Reviews:

Related manuals for P106F

Brands by name

Popular brands

Dell P106F, Service Manual

Search results

Summary of Contents for P106F

Reviews:

Related manuals for P106F

Brands by name

Popular brands