Steps
1. Place the network-port bracket on the I/O board.
2. Align the screw holes on the network-port bracket to the screw holes on the I/O board.
3. Replace the two (M2x5) screws that secure the network-port bracket to the I/O board.
Next steps
1. Install the
base cover
.
2. Exit
Service Mode
.
3. Follow the procedure in
After working inside your computer
.
I/O board
Removing the I/O board
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
2. Enter
Service Mode
.
3. Remove the
base cover
.
4. Remove the
network-port bracket
.
About this task
The following images indicate the location of the I/O board and provide a visual representation of the removal procedure.
42
Removing and installing components
