Dell P106F Service Manual Download Page 65

Page: 65 / 85

Drivers and downloads

This chapter details the supported operating systems along with instructions on how to install the drivers.

Topics:

•

Downloading the drivers

Downloading the drivers

Steps

1. Turn on your computer.

2. Go to

www.dell.com/support

3. Enter the Service Tag of your computer, and then click

Submit

NOTE:

If you do not have the Service Tag, use the auto-detect feature or manually browse for your computer model.

4. Click

Drivers & downloads

5. Click the

Detect Drivers

button.

6. Review and agree to the Terms and Conditions to use

SupportAssist

, then click

Continue

7. If necessary, your computer starts to download and install

SupportAssist

NOTE:

Review on-screen instructions for browser-specific instructions.

8. Click

View Drivers for My System

9. Click

Download and Install

to download and install all driver updates detected for your computer.

10. Select a location to save the files.

11. If prompted, approve requests from

User Account Control

to make changes on the system.

12. The application installs all drivers and updates identified.

NOTE:

Not all files can be installed automatically. Review the installation summary to identify if manual installation is

necessary.

13. For manual download and installation, click

Category

14. From the drop-down list, select the preferred driver.

15. Click

Download

to download the driver for your computer.

16. After the download is complete, navigate to the folder where you saved the driver file.

17. Double-click the driver file icon and follow the instructions on the screen to install the driver.

Drivers and downloads

Summary of Contents for P106F






















































































Search results

Summary of Contents for P106F

Reviews:

Related manuals for P106F

Brands by name

Popular brands

Dell P106F, Service Manual

Search results

Summary of Contents for P106F

Reviews:

Related manuals for P106F

Brands by name

Popular brands