2. Align the notch on the wireless card with the tab on the wireless-card slot on the system board.
3. Slide and insert the wireless card at an angle into the wireless-card slot on the system board.
4. Align the screw hole on the wireless-card bracket to the screw hole on the wireless card and system board.
5. Replace the screw (M2x3) that secures the wireless-card bracket to the wireless card and the system board.
Next steps
1. Install the
base cover
.
2. Exit
Service Mode
.
3. Follow the procedure in
After working inside your computer
.
Fan
Removing the fan
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
2. Enter
Service Mode
.
3. Remove the
base cover
.
About this task
The following images indicate the location of the fan and provide a visual representation of the removal procedure.
Steps
1. Disconnect the fan cable from the system board.
2. Remove the two (M2x3) screws that secure the fan to the palm-rest and keyboard assembly.
Removing and installing components
35
