manualshive.com logo in svg

Dell OptiPlex Gn+, Reference And Installation Manual, Page: 16 / 126

Share
Download
Dell OptiPlex Gn+ Reference And Installation Manual Download Page 16

xviii

Figure 3-2.

Add Network Card Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-4

Figure 3-3.

Card Configuration Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-5

Figure 3-4.

Configuration Settings Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . .  3-5

Figure 3-5.

Configuration Choice List Box  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-5

Figure 3-6.

Options Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-5

Figure 3-7.

Specify Interrupt Dialog Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-6

Figure 3-8.

Specify Interrupt List Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-6

Figure 3-9.

Specify I/O Port Dialog Box  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-7

Figure 3-10.

System Resource Usage Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . .  3-9

Figure 3-11.

Card Resource Usage Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-9

Figure 4-1.

I/O Ports and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-2

Figure 5-1.

Padlock Installed  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-2

Figure 5-2.

Removing the Computer Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-2

Figure 5-3.

Replacing the Computer Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-3

Figure 5-4.

Removing the Expansion-Card Cage. . . . . . . . . . . . . . . . . . . . . . . . .  5-3

Figure 5-5.

Computer Orientation View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-4

Figure 5-6.

Inside the Chassis. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-5

Figure 5-7.

System Board Jumpers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-6

Figure 6-1.

System Board Features  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-1

Figure 6-2.

Expansion Cards  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-2

Figure 6-3.

Riser-Board Expansion-Card Connectors . . . . . . . . . . . . . . . . . . . . .  6-2

Figure 6-4.

Removing the Filler Bracket  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-3

Figure 6-5.

Installing an Expansion Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-3

Figure 6-6.

DIMMs and DIMM Sockets  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-4

Figure 6-7.

Installing a DIMM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-6

Figure 6-8.

Removing a DIMM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-6

Figure 6-9.

Microprocessor Heat Sink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-7

Figure 6-10.

Removing the Microprocessor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-7

Figure 6-11.

Pin-1 Identification  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-8

Figure 6-12.

Installing the Microprocessor Chip . . . . . . . . . . . . . . . . . . . . . . . . . .  6-8

Figure 6-13.

Installing the Heat Sink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-9

Figure 6-14.

System Battery and Battery Socket . . . . . . . . . . . . . . . . . . . . . . . . .  6-10

Figure 7-1.

Drive Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-1

Figure 7-2.

Removing the Front-Panel Insert for the 5.25-Inch Bay . . . . . . . . . .  7-2

Figure 7-3.

Removing the Front-Panel Insert for the 3.5-Inch Bay . . . . . . . . . . .  7-2

Figure 7-4.

DC Power Cable Connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-3

Figure 7-5.

Drive Interface Connectors  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-3

Figure 7-6.

Removing the 3.5-Inch Diskette Drive/Bracket Assembly . . . . . . . .  7-4

Figure 7-7.

Removing the 5.25-Inch Drive Bracket . . . . . . . . . . . . . . . . . . . . . . .  7-4

Summary of Contents for OptiPlex Gn+































































































































Reviews:

No comments