Dell OptiPlex G1, Reference And Installation Manual, Page: 67 / 164

Using the ISA Configuration Utility 3-11
:KHQ\RXKDYHILQLVKHGVHOHFWLQJUHVRXUFHVIRUWKHXQOLVWHGFDUGFOLFN
2.LQWKH&RQILJXUH8QOLVWHG&DUGGLDORJER[
A message box appears, notifying you either that the card is using its default set-
tings or that it cannot use its default settings and must be reconfigured.
&OLFN2.,IWKHFDUGPXVWEHUHFRQILJXUHGUHFRUGWKHUHVRXUFHVHWWLQJV
UHFRPPHQGHGE\WKH,&8&OLFN&ORVHWRDFFHSWWKHUHVRXUFHVHWWLQJV
FXUUHQWO\GLVSOD\HG
,I\RXKDGWRDVVLJQDGLVDOORZHGUHVRXUFHYDOXHWRWKHFDUGLQVWHSV
DQGFOLFNHDFKRIWKHRWKHUFDUGVDQGWKHQFOLFN9LHZXQWLO\RXILQG
DQRWKHUFDUGXVLQJDUHVRXUFHYDOXHWKDWLVDOORZHGIRUWKHXQOLVWHG
FDUG5HDVVLJQWKHUHVRXUFHVHWWLQJIRUWKLVRWKHUFDUGXVLQJWKHSURFH
GXUHLQWKHQH[WVHFWLRQ´0RGLI\LQJD&DUGµ7KHQPRGLI\WKHUHVRXUFH
VHWWLQJVIRUWKHXQOLVWHGFDUGVRWKDWLWXVHVDQDOORZDEOHYDOXH
NOTE: After modifying the system configuration, you must turn the system off to
install, remove, or change jumper settings on the non-Plug and Play ISA expansion
cards to match the settings you selected in the ICU.
0RGLI\LQJD&DUG
Modifying a card allows you to change the system resources used by a card. This fea-
ture is helpful when you want to add a card that requires resources already in use by
other cards or devices in your computer. You can allocate different resources to the
cards currently in your computer to free the resources necessary for the card you
want to install.
You can also use this feature to force Plug and Play or PCI expansion cards to use spe-
cific resource values. This procedure is called
locking a card. You should lock a card
only if it uses static device drivers. See “Locking and Unlocking Cards” found later in
this chapter for more information.
NOTE: You cannot modify the resources of a Plug and Play or PCI expansion card. You
can only view the resources currently assigned and lock or unlock them.
To modify the resource settings for a listed or unlisted card, follow these steps:
6WDUWWKH,&8DVGHVFULEHGLQ´6WDUWLQJWKH,&8µIRXQGHDUOLHULQWKLV
FKDSWHU
6HOHFWWKHFDUGIURPWKHOLVWRILQVWDOOHGFDUGVLQWKH,&8ZLQGRZDQG
FKRRVH0RGLI\&DUGIURPWKH&RQILJXUHPHQXRUFOLFN0RGLI\
If the Card Configuration dialog box appears, the selected card is listed (it has a
configuration file in the ICU database). Continue with step 3.
If the Configure Unlisted Card dialog box appears, the card is unlisted (it does not
have a configuration file). Proceed to step 5.