Dell OptiPlex 7440 Owner'S Manual Download Page 44 | Manualshive

Page: 44 / 59

background image

Option

Description

• Deactivate
• Disable
• Activate

NOTE: The Activate and Disable options will permanently activate or disable
the feature and no further changes will be allowed

Default setting: Deactivate

Chassis Intrusion

This field controls the chassis intrusion feature. The options are:

• Disabled
• Enabled

Default setting: Disabled

CPU XD Support

Allows you to enable or disable the Execute Disable mode of the processor.
Enable CPU XD Support (default)

OROM Keyboard
Access

Allows you to set an option to enter the Option ROM Configuration screens using
hotkeys during boot. The options are:

• Enabled
• One Time Enable
• Disabled

Default setting: Enable

Admin Setup
Lockout

Allows you to enable or disable the option to enter setup when an admin password
is set.

• Enable Admin Setup Lockout - This option is disabled by default.

HDD Protection
Support

Allows you to enable or disable the HDD Protection feature.

• HDD Protection Support - This option is disabled by default.

Secure boot screen options

Option

Description

Secure Boot
Enable

This option enables or disables the

Secure Boot

feature.

• Disabled
• Enabled

Default setting: Enabled.

44

«
...
42
43
44
45
46
...
»

Summary of Contents for OptiPlex 7440




























































Reviews:

No comments

Related manuals for OptiPlex 7440

Brand: Gateway Pages: 108

Brand: Radio Shack Pages: 276

TRS-80 Color Computer 2

Brand: Radio Shack Pages: 44

Brand: Medion Pages: 2

Brand: Matrox Pages: 174

OFF65864 AIRLIFT 25

Brand: Seville Classics Pages: 4

Dimension XPS H233

Brand: Dell Pages: 89

Dimension XPS R Series

Brand: Dell Pages: 94

DIMENSION XPS GEN 3 WHL

Brand: Dell Pages: 144

Inspiron 14 5415

Brand: Dell Pages: 21

Brand: Dell Pages: 35

Inspiron 14 5410

Brand: Dell Pages: 14

Brand: Dell Pages: 8

Brand: Dell Pages: 45

Brand: Dell Pages: 85

Brand: Dell Pages: 47

Brand: Dell Pages: 54

Brand: Dell Pages: 78

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands