Removing the display assembly
1.
Before Working Inside Your Computer
.
2.
Remove the:
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.
l.
m.
n.
o.
p.
q.
NOTE: These instructions are valid only for non-touch computers. For touch computers, the
display panel should be disassembled in a clean-room environment.
3.
Perform the following steps as shown in the illustration:
a. Remove the power-switch cable from the retention clip [1].
b. Unthread the camera cable from the retention clips on the display panel [2].
4.
Perform the following steps as shown in the illustration:
a. Peel off the tape to access the cables [1].
35