Removing the memory module
1.
Before Working Inside Your Computer
.
2.
Remove the:
a.
b.
c.
3.
Pry the retention clips away from the memory module until it pops-up. Lift and remove the memory
module from its connector.
Installing the memory module
1.
Align the notch on the memory-card with the tab in the system-board connector.
2.
Press down on the memory module until the release clips spring back to secure them in place.
3.
Install the:
a.
b.
c.
4.
After Working Inside Your Computer
Removing the intrusion switch
1.
Before Working Inside Your Computer
.
2.
Remove the:
a.
b.
c.
d.
3.
Perform the following instructions as shown in the illustration:
a. Disconnect the intrusion-switch cable from the connector on the system board [1].
b. Unthread the intrusion-switch cable from the retention clips on the computer [2].
26
