Dell OptiPlex 7440 Owner'S Manual Download Page 49 | Manualshive

Page: 49 / 59

background image

Option

Description

Follow the procedure to recover BIOS from hard drive.

1.

Power on the system.

2.

While the blue Dell logo is visible, press the

F2

key to enter the System Setup.

3.

Press the

Num Lock

key, and verify that the Num Lock light is on.

4.

Press the

Caps Lock

key, and verify that the Caps Lock light is on.

5.

Press the

Scroll Lock

key, and verify that the Scroll Lock light is on.

6.

Press the

Alt

+

F

keys at the same time. The system will beep as the setup

defaults are restored.

7.

Press the

Alt

+

F

keys at the same time to restart the system. The changes are

automatically saved.

Cloud desktop screen options

Option

Description

Server Lookup
Method

This option specifies how the Cloud Desktop software will lookup the server
address. The options are:

• Static IP - Uses the static IP address
• DNS - Obtains several IP addresses using the Domain Name System (DNS)

protocol. This option is selected by default

NOTE: This option is relevant only when the Integrated NIC control in the
System Configuration group is set to Enable with Cloud Desktop.

Server Name

This option specifies the server name of the server.

NOTE: This option is relevant only when the Integrated NIC control in the
System Configuration group is set to Enable with Cloud Desktop, and when
the server look up method is set to DNS.

Server IP Address

This option specifies the primary static IP address of the Cloud Desktop Server with
which the client software communicates. The default Server IP Address is

255.255.255.255

NOTE: This option is relevant only when the Integrated NIC control in the
System Configuration group is set to Enable with Cloud Desktop.

Server Port

This option specifies the primary IP port of the Cloud Desktop with which the client
software communicates. The default Server Port value is 06910.

NOTE: This option is relevant only when the Integrated NIC control in the
System Configuration group is set to Enable with Cloud Desktop.

Client Address
Method

This option specifies how the client obtains its IP address. The options are:

• Static IP - Uses the static IP address

49

«
...
47
48
49
50
51
...
»

Summary of Contents for OptiPlex 7440




























































Reviews:

No comments

Related manuals for OptiPlex 7440

Brand: Radio Shack Pages: 31

Brand: Gateway Pages: 72

Brand: Kontron Embedded Computers Pages: 48

Brand: Dell Pages: 57

Brand: Dell Pages: 57

MultiSync X463UN

Brand: NEC Pages: 6

MultiSync X551S

Brand: NEC Pages: 9

MultiSync X463UN

Brand: NEC Pages: 44

MultiSync X551UN

Brand: NEC Pages: 9

POWERMATE CT 815 - RELEASE NOTES

Brand: NEC Pages: 165

Brand: NEC Pages: 110

Brand: NEC Pages: 116

PM-ECO-900 - PowerMate Eco - 256 MB RAM

Brand: NEC Pages: 28

Brand: NEC Pages: 181

MultiSync X463UN

Brand: NEC Pages: 2

Brand: NEC Pages: 195

Brand: NEC Pages: 255

POWERMATE ES 5250 - S

Brand: NEC Pages: 276

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands