Installing the speakers
1.
Align the speaker module on the slot in the chassis.
2.
Tighten the screws to secure the speaker to the chassis.
3.
Thread the speaker cables via the clips.
4.
Connect the speaker cable to the connector on the system board.
5.
Install:
a.
b.
c.
d.
e.
6.
.
Removing the converter board
1.
Before Working Inside Your Computer
.
2.
Remove the:
a.
b.
c.
d.
3.
Perform the following steps as shown in the illustration:
a. Disconnect the convertor-board cable from the converter board [1, 2].
b. Disconnect the display-backlight cable from the converter board [3].
20
