System board
Removing the system board
Prerequisites
1. Follow the procedure in
before working inside your computer
NOTE:
Your computer’s Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup
program after you replace the system board.
NOTE:
Replacing the system board removes any changes that you have made to the BIOS using the BIOS setup
program. You must make the appropriate changes again after you replace the system board.
NOTE:
Before disconnecting the cables from the system board, note the location of the connectors so that you can
reconnect the cables correctly after you replace the system board.
2. Remove the
3. Remove the
.
4. Remove the
.
5. Remove the
.
6. Remove the
7. Remove the
8. Remove the
.
9. Remove the
/
powered graphical processing unit
.
10. Remove the
processor fan and heat-sink assembly
11. Remove the
About this task
The following images indicate the location of the system board and provides a visual representation of the removal procedure.
64
Disassembly and reassembly
Summary of Contents for OptiPlex 5080 Tower
