Dell OptiPlex 5080 Tower Service Manual Download Page 23 | Manualshive

Page: 23 / 77

background image

About this task

The following images indicate the location of the 2.5-inch hard-disk drive bracket and provides a visual representation of the removal
procedure.

Steps

1. Pry one side of the hard-disk drive bracket edge to release the tabs on the bracket from the slots on the first hard-disk drive.
2. Slide and lift the hard drive from the hard-drive bracket.
3. Similarly pry one side of the hard-disk drive bracket edge to release the tabs on the bracket from the slots on the second hard-disk

drive.

4. Slide and lift the second hard-disk drive from the hard-disk drive bracket.

Installing the 2.5-inch hard-disk drive bracket

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the 2.5-inch hard-disk drive bracket and provides a visual representation of the installation
procedure.

Steps

1. Place the first hard-disk drive into the hard-disk drive bracket and align the slots on the bracket with the slots on the hard-disk drive.
2. Snap the first hard-disk drive into the hard-disk drive bracket.
3. Place the second hard-disk drive into the hard-disk drive bracket and align the slots on the bracket with the slots on the hard-disk

drive.

4. Snap the second hard-disk drive into the hard-disk drive bracket.

Next steps

2.5 in. hard-disk drive assembly

.

.

4. Follow the procedure in

after working inside your computer

.

Installing the 2.5-inch hard-disk drive assembly

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the 2.5-inch hard-disk drive assembly and provides a visual representation of the installation
procedure.

Disassembly and reassembly

23

«
...
21
22
23
24
25
...
»

Summary of Contents for OptiPlex 5080 Tower














































































Reviews:

No comments

Related manuals for OptiPlex 5080 Tower

Brand: Zenith Pages: 98

Brand: Sinclair Pages: 65

Brand: A1Touch Pages: 9

Brand: PROAIM Pages: 3

Brand: Roland Pages: 1

Brand: Antec Pages: 10

Brand: Lobo Drives Pages: 40

Brand: MSI Pages: 71

Brand: Alienware Pages: 55

Brand: Acer Pages: 48

Brand: Acer Pages: 68

5535-5050 - Aspire

Brand: Acer Pages: 11

Brand: Acer Pages: 24

Brand: Acer Pages: 24

Brand: Acer Pages: 22

Brand: Acer Pages: 117

Brand: Acer Pages: 108

AcerPower S series

Brand: Acer Pages: 53

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands