NOTE:
The optional GPU card images below are representative and may not match the actual optional GPU card to remove
the NVLink Bridge.
Steps
1. Locate the NVLink bridge on the GPU cards.
2. By using a plastic scribe, lift the NVLink bridge.
3. Hold the NVLink bridge by the edges to remove it from the GPU cards.
Figure 84. Removing the optional NVLink bridge
Next steps
1. Install the NVLink bridge cover on the GPU cards.
2.
Replace the optional NVLink bridge
.
Installing the optional NVLink bridge
Prerequisites
1. Follow the safety guidelines listed in
.
2. Follow the procedure listed in
before working inside your system
.
3. If installing a new NVLink bridge, unpack it and prepare the NVLink bridge for installation.
NOTE:
For instructions, see the documentation accompanying the card.
4. If installed,
5. If installed,
6. If installed,
remove the expansion card holder
.
NOTE:
The optional GPU card images below are representative and may not match the actual optional GPU card to install
the NVLink Bridge.
Steps
1. If applicable, locate and remove the NVLink bridge cover on the GPU cards by using a plastic scribe.
98
Installing and removing system components
Summary of Contents for Olympus O-T600
Page 21: ...Figure 16 Configuration and layout 20 Dell EMC PowerEdge T640 overview ...
Page 22: ...Figure 17 Electrical overview Dell EMC PowerEdge T640 overview 21 ...
Page 23: ...Figure 18 Memory information 22 Dell EMC PowerEdge T640 overview ...
Page 24: ...Figure 19 System tasks Dell EMC PowerEdge T640 overview 23 ...
