Removing the GPU power interposer board
Prerequisites
1. Follow the safety guidelines listed in
on page 27.
2. Follow the procedure listed in
Before working inside your system
3.
Remove the power supply units (PSUs)
.
4.
Steps
1. Lift the release pin, and slide the power interposer board (PIB) to release the board from the guide pin.
2. Disengage the GPU PIB from the guide pins and lift the PIB out of the system.
Figure 122. Removing the GPU power interposer board
Next steps
1.
Install the GPU power interposer board
.
Installing the GPU power interposer board
Prerequisites
Follow the safety guidelines listed in
on page 27.
Steps
1. Align the guide slots on the GPU power interposer board (PIB) with the guide pins on the chassis.
2. Slide the GPU PIB until the release pin locks into place and secures the PIB.
Installing and removing system components
127
Summary of Contents for Olympus O-T600
Page 21: ...Figure 16 Configuration and layout 20 Dell EMC PowerEdge T640 overview ...
Page 22: ...Figure 17 Electrical overview Dell EMC PowerEdge T640 overview 21 ...
Page 23: ...Figure 18 Memory information 22 Dell EMC PowerEdge T640 overview ...
Page 24: ...Figure 19 System tasks Dell EMC PowerEdge T640 overview 23 ...
