Figure 82. Removing the metal filer bracket
3. Hold the GPU card by the edges, and align the card edge connector with the expansion card connector on the system board.
4. Insert the GPU card into the expansion card slot on the system board, until it is firmly seated.
Figure 83. Installing the optional GPU card
Next steps
.
3. Follow the procedure listed in
after working inside your system
.
NVLink bridge
Removing the optional NVLink bridge
Prerequisites
1. Follow the safety guidelines listed in
.
2. Follow the procedure listed in
before working inside your system
.
3. If installed,
remove the expansion card holder
.
4. If installed,
Installing and removing system components
97
Summary of Contents for Olympus O-T600
Page 21: ...Figure 16 Configuration and layout 20 Dell EMC PowerEdge T640 overview ...
Page 22: ...Figure 17 Electrical overview Dell EMC PowerEdge T640 overview 21 ...
Page 23: ...Figure 18 Memory information 22 Dell EMC PowerEdge T640 overview ...
Page 24: ...Figure 19 System tasks Dell EMC PowerEdge T640 overview 23 ...
