Dell Networking 2048, Reference Manual

Page: 639 / 1823

QoS Commands
639
assign-queue
Use the assign-queue command in Policy-Class-Map Configuration mode to
modify the queue ID to which the associated traffic stream is assigned.
Syntax
assign-queue
queueid
•
queueid
— Specifies a valid queue ID. (Range: integer from 0–6.)
Default Configuration
This command has no default configuration.
Command Mode
Policy-Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to change the queue ID to 4 for the
associated traffic stream.
console(config-policy-classmap)#assign-queue 4
class
Use the
class
command in Policy-Map Class Configuration mode to create an
instance of a class definition within the specified policy for the purpose of
defining treatment of the traffic class through subsequent policy attribute
statements.
Syntax
class
classname
no class
– – show class-map –
2CSNXXX_SWUM200.book Page 639 Tuesday, December 10, 2013 1:22 PM